User Guide

Creating a Bitwise Compare Routine 227
Assigning GPRMs to Title_1 and Title_2
To assign GPRMs to Title_1 and Title_2:
1 In the Scenario Editor authoring area, double-click the Post flag on the Title_1 PGC. The
Simulation window opens. Make sure the PGC Commands tab is selected at the bottom
of the window.
2 Set the Pre/Post/Cell menu (just below the PGC Commands tab) to Post.
3 Deselect the No Command option. The Command menu appears.
4 Set the Command menu to Set To GPRM and do the following:
• Select the Immediate option. A text field replaces the GPRM menu on the right.
• Make sure the Set Instruction Group menu (on the left) is set to Assign. This instruction
allows you to assign a a GPRM or SPRM value.
• Make sure the GPRM menu (in the middle) is set to GPRM0.
• Enter a value of 1 in the text field to the right of the GPRM menu. This assigns GPRM0
with a value of 1.
5 Repeat the previous steps for Title_2, assigning GPRM1 to 1.