User Guide

Building Type 1, Type 2, and Type 3 Commands 213
10 Set the Jump To menu to the destination for the Type 3 command.
The Jump To menu includes three cell locations, three program locations, and four PGC
locations. You can also create a jump to the Post command of the current PGC or to a
Resume location within a video stream. Only the Resume option is available when
creating a Pre or Post Type 3 command.
11 To assign a button to an SPRM, set the Highlight Button menu to the button number you
want to assign.
• If you selected No Jump for the Jump To destination, you must assign a button in its
place, since Type 3 commands must have a jump destination.
• If you selected a destination for the Jump To destination, you can select a specific button
number to assign to the SPRM. Select button 0 if you do not want to assign an SPRM.