User Guide

Jump Commands 201
Removing Jump Commands
If after adding a Jump command you want to specify a different jump destination, you can
simply re-add the Jump command to update the command. If you want to remove the Jump
command entirely, you can do so in the Simulation window.
To remove a Jump command from a Pre, Post, or Cell command:
1 In the Scenario Editor authoring area, double-click the Pre, Post, or Cell flag that contains
the Jump command you want to remove. The Simulation window opens with the PGC
Commands page automatically displayed.
2 Set the Pre/Post/Cell menu to the type of command you want to remove.
3 Do one of the following:
• If the Command List contains just one command, select it and set the Command menu to
No Operation, then select the No Command option. The Jump command is removed and
the command is displayed as “Nop” (No Operation).
• If the Command List contains multiple commands, select the Jump command you want
to remove and click Delete. The Jump command is removed from the list.
To remove a Jump command from a button highlight:
1 In the Scenario Editor authoring area, double-click the Btns flag that contains the Jump
command you want to remove. The Simulation window opens with the Button
Commands page automatically displayed.
2 In the Command List, select the button containing the Jump command you want to
remove.
3 Set the Command menu to No Operation. The Jump command is removed and the
button command is displayed as “Nop” (No Operation).