User Guide

158 Chapter 10, Subpicture Colors and Effects
Adding a Subpicture Wipe
The wipe effect removes portions of the subpicture layer gradually, from left to right or right
to left, so that the image appears to be wiped from the screen.
To add a subpicture wipe:
1 In the Track Editor directory area, select the track to which you will add the wipe effect.
2 If the Simulation window is not visible, select View > Simulation Window.
3 In the Simulation window, click the Subpicture and Highlight tab, then scroll to the
Advanced Effects page with the Left-Right arrows (on the right side of the tab). The
Effects tools and Effects timeline appear.
4 With the Wipe tool, drag in the green timeline from left to right to insert the wipe effect.
A dark green wipe block appears in the timeline.
5 To adjust the placement of the wipe, drag the wipe block left or right.
6 To adjust the start time of the wipe, click the wipe block and drag the left edge of the
block, or enter a new time in the Start Time To Video field.
7 To adjust the end time of the wipe, click the wipe block and drag the right edge of the
block, or enter a new time in the Duration field.
8 To specify the direction of the wipe, click the wipe block and choose one of the
following options from the Type menu:
Left The wipe moves from the left to right across the screen.
Right The wipe moves from the right to left across the screen.
Scroll
Stop
Fade
Wipe
Select