User Guide

138 Chapter 9, Creating Menu Tracks
Adding Button Links with Auto Route
You can automatically add button links with the Auto Route command. The direction of the
links is determined by the assigned button numbers, so you may want to first arrange the
buttons numerically, starting with button 1 and proceeding from left to right and then top to
bottom.
To add button links with Auto Route:
1 In the Track Editor directory area, select the menu track that contains the button
highlights to which you will add links.
2 If the Simulation window is not visible, select View > Simulation Window.
3 In the Simulation window, choose Tools > Auto Route. Button links are added that will
allow the viewer to navigate and select the buttons by clicking the LEFT/RIGHT and
UP/DOWN ARROWS on the remote control.
Adding Button Links Manually
For complex menus with many buttons, the Auto Route command may not yield the desired
results. In this case, you can route buttons manually or override the automatic routing.
To add button links manually:
1 In the Track Editor directory area, select the menu track that contains the button
highlights to which you will add links.