User Guide

FILE FORMATS AND ATTRIBUTES
69
CONVERTING BETWEEN MONO AND STEREO
To convert a file from mono to stereo:
1. Open the TUTOR1.WAV file. Right-click on the status field, which has the
word Mono, and select Stereo from the shortcut menu.
2. When you convert from mono to stereo, the Mono to Stereo dialog will appear,
asking you where you want to put the data.Your choices are:
Left Channel The mono data is placed in the left channel.The
right channel is set to silence.
Right Channel The mono data is placed in the right channel.
The left channel is set to silence.
Both Channels The mono data is copied into both channels.
When performing stereo to mono conversions, the following options are
available:
Left Channel Mono data is taken only from the left channel of
the stereo file.
Right Channel Mono data is taken only from the right channel
of the stereo file.
Mix Channels Mono data is created by mixing both channels of
the stereo file.
3. For this exercise, put the data in the left channel to see how the function
works. Click the radio button next to Left Channel and select the OK button.