User Guide

PASTING DATA FROM THE CLIPBOARD

To paste data:

1. Move the cursor to the beginning of the TUTOR1 file by selecting the Go to

Start button on the playbar

2. Choose the Paste command from the Edit menu. You should now see the

data for the word “Wow” appear at the beginning of the window. Press the

Play button just to make sure. You should hear “Wow Wow Sound editing

just gets easier and easier.”

You have just made your first edit in Sound Forge XP! There are quicker ways

to copy and paste data with Sound Forge XP – you’ll find these described in

the Advanced Editing section.

PASTING DATA TO ANOTHER WINDOW

Data on the clipboard remains there until it is replaced by another operation

that places data onto the clipboard. Therefore, you can continue pasting the

data anywhere you want.

To paste data to a new window:

1. Create a new window by selecting New from the File menu.

2. Again, select the Paste command from the Edit menu.You should now have

a new data window with the data for the word “Wow.”You can also do this

by selecting the Paste to New option from Paste Special on the Edit menu.This

creates a new window and fills it with the clipboard contents in one easy

step.

CUTTING DATA

To cut data:

1. Select a section of data you want to cut. Select one of the “Wow” words

(you should have two if you have been following the examples) from

TUTOR1.

2. Now select the Cut command from the Edit menu. This will remove the

selected data and place it on to the clipboard.

EDITING AND NAVIGATION