User Guide

REFERENCE
201
CHORUS
The Chorus effect creates the illusion of two or more sound sources playing
together.This is done by adding a pitch-modulated and delayed version of the
input signal to the unprocessed input signal.The effect simulates the variances
in pitch and timing that occur naturally when two or more people try to play
or sing the same thing at the same time.
Use the Chorus dialog to choose between five preset chorus effects: Light, Heavy,
Vibrato, Reverberant, and Echo-Vibrato.
DELAY/ECHO
Use the Delay/Echo dialog to add a delayed copy of the sound signal to the file.
A single delay or decaying multiple delays can be added before or after the
sound signal.
DRY OUT (-INF. TO 0 DB)
Amount of unprocessed signal mixed into the output.
DELAY OUT (-INF. TO 0 DB)
Amount of delayed signal mixed into the output.
MULTIPLE DELAYS/ECHOES (ON/OFF)
When selected, multiple delayed copies are added to the file by using feedback
(delaying the delayed signal, and so on), which creates a decaying echo effect.
When off, a single delayed copy is added.
PRE-DELAY/ECHO (ON/OFF)
When on, the delayed copy is added before the sound (as heard in the Twilight
Zone).When off, the delayed copy is added after the sound, as heard in everyday
life echoes.