User Guide

REFERENCE
199
For a very drastic high frequency boost or cut, repeat the effect 2 or 3
times with the amount set to either limit.
Note that since the Enhance function boosts frequencies near the Nyquist rate,
the current sample rate will determine what frequencies will be affected. At
44,100 Hz, the effect can be very subtle (unless you repeat it a few times until
your ears ring).
SWAP CHANNELS
Select this option to exchange the contents of the right and left channels of a
stereo recording.
TIME COMPRESS/EXPAND
The Time Compress/Expand dialog changes the duration of a sound file without
altering the pitch.
MODE
Selects the algorithm used to process the sound. The modes have been labeled
for suggested uses, but do not assume that one mode will not work well with
a certain type of sound. Depending on the source sound, different modes can
vary the resulting quality drastically, so experimenting with all modes is
suggested. In general, the music setting will work with the largest variety of
material.
Check the bottom of the dialog for a summary of your choices.You should be
able to achieve excellent results for ratios between 75% and 115%. Beyond this
range, you will start to hear artifacts such as echoes, flanging, or drop-outs.
Running the process a number of times using small increments (like 105%)
will create different effects than processing all at once with a large time
change.
FINAL LENGTH (50% TO 500% OF ORIGINAL LENGTH)
Desired length of the selection.
NOTE