User Guide

REFERENCE
197
RESET ENVELOPE
Press this button to return the pan envelope to its default shape.
LEFT TO RIGHT
Select this option to create a smooth panning effect from the left channel to
the right. If the original source data is mono, Sound Forge XP automatically
converts it to stereo.
RIGHT TO LEFT
Select this option to create a smooth panning effect from the right channel to
the left. If the original source data is mono, Sound Forge XP automatically
converts it to stereo.
RESAMPLE
Use this dialog to change the sampling rate of an existing sound file.
NEW SAMPLE RATE (2,000 TO 96,000 HZ)
Sample rate to which the sound file will be converted.
APPLY AN ANTI-ALIAS FILTER DURING RESAMPLE (ON/OFF)
Apply an anti-aliasing low-pass filter to the sound file before resampling when
changing to a lower sampling rate. Since the maximum frequency that can be
represented by a particular sample rate is one-half of the sampling rate (the
Nyquist frequency), high frequencies in a sound file cannot be represented if
the sound file is resampled to a lower sampling rate.Therefore, when changing
to a lower sampling rate, if the sound file has a strong high-frequency content,
anti-aliasing should be used to prevent these high frequencies from becoming
low-frequency distortion.
SET THE SAMPLE RATE ONLY (DO NOT RESAMPLE) (ON/OFF)
If this option is checked the playback rate is changed without resampling the
data. This means that the original pitch of the file is not preserved. When
converting between two very close sample rates and speed is of the essence, this
option can be turned on.