User Guide

REFERENCE
169
LENGTH (0 TO TOTAL LENGTH)
The total length of the selection is specified here.
CHANNEL (LEFT, RIGHT, BOTH)
If the sound file is stereo, you can specify which channel of the data will be
selected.
INPUT FORMAT
Determines the input format that will be used to enter the Start, End, and Length.
PLAY LOOPED
Check this box to play the selection repeatedly.
Shortcut:
Control+D
Waveform Display shortcut menu
Double-click on the Selection Length field in the playbar
UNDO ALL
Use this command to undo all operations performed on a file. Unless Undo was
disabled at some point, this will return your file to its original state when first
opened. However, if you disable undo at any time, you might not be able to
return to the file’s original state.
When not working in direct mode, you can close the file without
saving
changes to revert to the original file. However, when working in direct mode
if you decide to not save the current changes, Sound Forge XP does an Undo All
operation automatically before saving.
DISABLE UNDO/REDO
Use this command to prevent Sound Forge XP from creating temporary files
used for undoing operations. Since creating undo files takes time and disk
space, it is sometimes more convenient to have the Disable Undo option on,
especially when working with large files.