User Guide

RECORDING
123
REVERB
The Reverb function is used to simulate the acoustics of different environments.
When a sound is generated inside a room, you first hear the original sound,
followed by a quick succession of echoes.These echoes are the early reflections.
Then, as the echoes accumulate, you hear thousands of echoes combined into
a smoothly decaying reverberation.
To apply Reverb:
1. Open TUTOR1.WAV. Select Reverb from the Effects menu. The Reverb dialog
will appear.
2. Select the Bright hall button, click OK, and play the sound. Notice how the
imagined space where the recording took place changes from a small studio
to a large, rich hall.