User Guide

RECORDING
111
CHANGING THE START POSITION
The Start position determines where playback or recording begins from the
time you press the Play or Record button. Four button controls − Go to Start,
Rewind, Forward, and Go to End − allow you to quickly change the Start position.
Although potentially confusing at first, these controls are convenient when
you’re doing multiple recordings.The Go to Start and Go to End buttons move the
Start position to the beginning or end of the file to which you are recording.
After you’ve recorded a take, the Rewind and Forward buttons move the Start
position to the start or end of the take.
For example, to listen to the entire file, press Go to Start before pressing the Play
button. Likewise, to start recording at the end of the file, press Go to End before
selecting the Record button. If you wish to start playback or recording at a
specific point, press the Go To button and enter the desired Start position.
RECORDING STATUS
While you are recording, the amount of Time Recorded will increase and the Time
left on drive will decrease. Make sure to keep an eye on your Time left on drive if the
available record time is limited. It’s never fun to run out of recording time!
FINISHING RECORDING
When you have finished recording, select the Close button to exit the Record
dialog and return to normal editing mode.