User Guide
42
GETTING STARTED CHP. 3
Positioning the cursor with the Go To command
The Go To command is used to place the cursor at a specific location in the ACID project.
• Press to position the cursor based on the position displayed on the beat ruler. Specify a position
(in measures.beats.ticks format) in the box that appears in the time display and press .
• Press to position the cursor based on the time displayed on the time ruler. Specify a time in the
box that appears in the time display and press .
Tip:
You can also open the boxes in the time display by
double-clicking the desired value.
Making selections
You must select events before you can move or edit them.
Selecting an event
1.
Click the Draw Tool button ( ).
2.
Click an event. The event is highlighted.
Selecting multiple events
ACID provides you with several methods of selecting multiple events:
• Press or while clicking events.
• Use the
Select All on Track command.
• Use the
Select Events to End command.
• Use the
Select All command.
• Use the Selection tool.
Note:
Unless stated otherwise, selections can only be made
using the Draw tool.
Ctrl +G
Enter
Shift +G
Enter
Selected event
Ctrl
Shift