User Guide

102
WORKING WITH TRACKS CHP. 7
Hiding effect automation envelopes on a track
To hide effect parameter envelopes, click the arrow adjacent to the Tra ck F X button ( ) and choose Hide All
FX Automation Envelopes
from the menu. To display envelopes again, click the arrow adjacent to the Track FX
button ( ) and choose
Show All FX Automation Envelopes from the menu.
Tip: Press to toggle through the display of all effect
parameter automation envelopes.
Removing track envelopes
You can remove envelopes from tracks quickly and easily.
Note: When you remove an envelope from a track and then
add it again, you must recreate its envelope points.
Removing volume, pan, bus, or assignable effect envelopes
1.
Select the track(s) from which you want to remove the envelope(s).
2. From the Insert menu, choose Envelopes. A submenu appears showing a check mark next to the
envelopes being used.
3. From the submenu, choose the type of envelope you want to remove. The envelope type is removed from
the selected track(s).
Tip: Press to remove a volume envelope or press
to remove a pan envelope.
Removing effect automation envelopes
1.
Click the arrow adjacent to the Track FX button ( ) and choose FX Automation from the menu. The FX
Automation Chooser appears.
2. Click the plug-in whose automation envelopes you want to remove. The parameters for the effect appear
in the dialog.
3. Clear the check boxes for the envelopes to be removed.
4. Click OK.
Tip: You can bypass effect automation without removing
envelopes. For more information, see Bypassing effect
automation on page 95.
E
Shift +V
Shift
+P