User Guide

CHP. 7 WORKING WITH TRACKS
101
Cutting, copying, and pasting envelope points
1.
Select the Envelope tool using one of the following methods:
• From the
Edit menu, choose Editing Tool, and choose Envelope from the submenu.
• Click the
Envelope Tool button ( ) on the toolbar.
2. Click within a track to select it.
3. Drag along the timeline to select envelope points.
4. From the Edit menu, choose Cut or Copy.
5. Position the cursor where you want to paste envelope points across a track.
6. From the Edit menu, choose Paste.
Copying envelopes to another track
1.
Select the Envelope tool using one of the following methods:
• From the
Edit menu, choose Editing Tool, and choose Envelope from the submenu.
• Click the
Envelope Tool button ( ) on the toolbar.
2. Click within a track to select it.
3. From the Edit menu, choose Select All.
4. From the Edit menu, choose Cut or Copy.
5. Click within a track to select it.
6. Click the Go to Start button ( ) if you want the envelope to appear exactly as it was in the original track,
or click to position the cursor where you want the envelope to start.
7. From the Edit menu, choose Paste.
Hiding track envelopes
After you have created your envelope and set your envelope points, you may hide the envelope. Hiding an
envelope does not affect the envelope point settings or track playback.
Hiding volume, pan, bus, or assignable effect envelopes
1.
Select the track(s) whose envelope(s) you want to hide.
2. From the View menu, choose Show Envelopes. A submenu appears. A check mark next to an envelope
type indicates that it is visible in the track view.
3. From the submenu, choose the type of envelope you want to hide. The specified envelope type no longer
appears in the track view for the selected track.
You can use the same steps to display the envelope again.
Tip: Select a track and press to hide a volume envelope or
to hide a panning envelope. Press the key again to display
the envelope.
V
P