Clock Radio User Manual
Table Of Contents
- CP-UM-5093E-04.pdf
- SAFETY PRECAUTIONS
- Contents
- Chapter 1. GENERAL
- Chapter 2. NAMES & FUNCTIONS OF PARTS
- Chapter 3. MOUNTING
- Chapter 4. WIRING
- 4-1 Wiring Precautions
- 4-2 Compensating Lead
- 4-3 Terminal Connections
- 4-4 Layout of Terminals and Recommended Lead Draw-out Direction
- 4-5 Connecting the Ground and Power Supply
- 4-6 Wiring of Standard and Add-on Terminal Base
- 4-7 Connecting Inputs (analog inputs)
- 4-8 Connecting control outputs (outputs 1, 2)
- 4-9 Connecting auxiliary outputs (outputs 2, 3)
- 4-10 Connecting Event Output (relay output)
- 4-11 Connecting Time Event Output (open-collector)
- 4-12 Connecting External Switch (RSW) Input
- 4-13 Connecting for Communications
- 4-14 Isolating Inputs and Outputs
- Chapter 5. FUNCTIONS
- Chapter 6. OPERATION
- Chapter 7. PARAMETER SETUP
- Chapter 8. PROGRAM SETUP
- Chapter 9. TROUBLESHOOTING
- Chapter 10. SPECIFICATIONS
- Chapter 11. CALIBRATION
- Index
Chapter 9. TROUBLESHOOTING
9-9
Upper Display Lit LEDs Lower Display Motor Action Remarks
C A .C L OT2 CCW
↓
C A .O P OT1 CW
Upper Display Lit LEDs Lower Display Motor Action Alarm Display Cause
C A .C L OT2 CCW A L 1 2
↓
C A .O P OT1 CW
C A .C L OT2 CCW A L 1 2
↓
C A .O P OT1 CW
C A .C L OT2 CCW A L 1 1
A L 1 2
C A .C L OT2 CW A L 1 2
↓
C A .O P OT1 CCW
C A .C L OT2 CW A L 1 1
A L 1 2
C A .C L OT2 CW A L 1 2
↓
C A .O P OT1 CCW
■ Normal wiring for direct motor rotation
Readout decreases
from 1000 to 500 and
stabilizes.
Readout increases
from 500 to 9500 and
stabilizes.
If the motor rotates CCW
when OT2 lights, motor
terminals 1 and 2 are
wired for direct rotation.
■ Normal wiring for reverse motor rotation
Upper Display Lit LEDs Lower Display Motor Action Remarks
C A .C L OT2 CW
↓
C A .O P OT1 CCW
Readout decreases
from 9000 to 500 and
stabilizes.
Readout increases
from 500 to 9500 and
stabilizes.
If the motor rotates CW
when 1↔ 2 and G ↔ Y
are reversed and OT2
lights, motor terminals 1
and 2 are wired for
reverse rotation.
■ Alarm display caused by wrong wiring and causes
G↔Y
reversed
T↔G
reversed
T↔Y
reversed
1↔2
reversed
1↔2
reversed,
T↔G
reversed
1↔2
reversed,
T↔Y
reversed
Display increases and
stabilizes.
Display decreases and
stabilizes.
Display decreases and
stabilizes.
Display stabilizes at
9999.
Display stabilizes at
9999.
Display increases and
stabilizes.
Display decreases and
stabilizes.
Display stabilizes at
9999.
Display decreases and
stabilizes.
Display stabilizes at
9999.