User Manual
Table Of Contents
- Overview
- Model Matrix
- Contents in Box
- Accessories (not included)
- Features
- Common Features, All Models
- Adjustable Volume Control
- Automatic Loud Noise Suppression
- Convertible Headband
- Color Ruggedizers
- Extreme Environmental Design
- Flexible Charging
- Hearing Protection
- In Headset Charging
- Light Weight
- Listen Thru Situational Awareness
- Long Battery Life
- Multilingual Voice Prompts
- Multimode Auto Shutdown
- Noise Dosimeter
- Two Stage Low Battery Alert
- USB Programmable
- User Replaceable Battery
- Voice Prompts
- Wired Line-in
- Common Features, Communication Headsets
- Wireless Bluetooth® Technology
- Wireless DECT Communications
- Common Features, All Models
- Configuring the Headset
- Fitting
- Charging
- Battery Replacement
- LED Indications
- Settings & Operation
- Care and Maintenance
- Troubleshooting
- Glossary
- Specifications
- Important Safety Information
- Sonetics Standard Limited Warranty
12 | Page
Main Menu
The headset settings are adjusted in the headset menu system. When in the menu
system, all other functions except PTT and Power are locked out.
To Enter the Main Menu
• Press the menu button for 3 seconds.
• Sequentially pressing the menu button cycles thru the menu items.
Using the plus and minus – makes adjustments and enters the next
level of menu.
To Exit the Main Menu
• Press the menu button or wait 30 seconds to automatically exit.
Pressing any of the right side buttons (forward , PTT , back ) will fully
exit the menu as well.
Listen Thru Volume
Factory Setting
Options:
Maximum
•
Maximum (Amplified Listen Thru)
• Level 4: No Gain Listen Thru
• Level 3
• Level 2
• Level 1
•
Off
To Adjust
1. Enter the Main Menu
2. Repeatedly press the menu button till you hear “Listen Thru”.
3. Then press either the plus or minus – to adjust the listen thru volume up or
down.
4. To exit either press the menu button or wait 30 seconds.
VOX Level
The VOX Level may be configured into multiple modes of operation to tailor to the
user’s application.
• To turn on the microphone always use “ON”. This disables the VOX noise gate
completely. A whisper will be heard by all.
• The next 3 are for setting automatic noise gate functionality with lower to
higher sensitivities.
• The last 4 are separate settings for fixed sound pressure level environments.
This is for use where you know the sound levels are consistent.
When the user presses the Radio PTT, any noise gate will be removed to allow the
user to be heard without effort to overcome the noise gate settings.
Factory Setting
Options:
Auto 2
• Microphone On (No Noise Gate)
• Auto 1
• Auto 2
• Auto 3
• Fixed 90dB
• Fixed 100dB
•
Fixed 110dB
To Adjust
1. Repeatedly press the menu button till you hear “VOX”.
2. Then press either the plus or minus – to adjust the VOX level. This adjusts
how much force you will have to use to open the microphone.
a. At minimum, the VOX will be off and you will hear all sounds through the
talk microphone.
b. At maximum, the headset will require PTT to be pressed to talk.
3. To exit either press the menu button or wait 30 seconds.