User Manual
Table Of Contents
- Overview
- Model Matrix
- Contents in Box
- Accessories (not included)
- Features
- Common Features, All Models
- Adjustable Volume Control
- Automatic Loud Noise Suppression
- Convertible Headband
- Color Ruggedizers
- Extreme Environmental Design
- Flexible Charging
- Hearing Protection
- In Headset Charging
- Light Weight
- Listen Thru Situational Awareness
- Long Battery Life
- Multilingual Voice Prompts
- Multimode Auto Shutdown
- Noise Dosimeter
- Two Stage Low Battery Alert
- USB Programmable
- User Replaceable Battery
- Voice Prompts
- Wired Line-in
- Common Features, Communication Headsets
- Wireless Bluetooth® Technology
- Wireless DECT Communications
- Common Features, All Models
- Configuring the Headset
- Fitting
- Charging
- Battery Replacement
- LED Indications
- Settings & Operation
- Care and Maintenance
- Troubleshooting
- Glossary
- Specifications
- Important Safety Information
- Sonetics Standard Limited Warranty
9 | Page
Charging
The Sonetics powered headsets use a barrel charging jack with the connections
below.
Wall Adapter Charging
Only charge the headset using the supplied 12VDC regulated wall adapter.
WARNING: Using unregulated wall adapters will damage the headset and
void the warranty.
Vehicle Charging
Connect the RED wire to +12VDC and the BLACK wire to battery chassis ground.
Install the fuse no further than 18" from the battery.
WARNING: Only replace fuse with the same type, 1.5A AGU.
WARNING: Voltages exceeding the headset charging specification will
damage the headset. Verify the headset voltage specification to the vehicle
battery and charging system specifications.