Datasheet

MPI-525
Index: WMGBMPI525
MULTIFUNCTION ELECTRICAL
INSTALLATIONS METER
WAADAWS03
WAPRZ1X2YEBB
WAPRZ1X2BUBB
WAPRZ1X2REBB
WAPRZ030REBBSZ
WAPRZ015BUBBSZ
WAPRZUSB
WASONYEOGB1
WASONREOGB1
WASONBUOGB1
WAPRZ1X8REBB
WAPRZ1X8BLBB
Standard accesories of the meter MPI-525:
- probe with START button with UNI-SCHUKO (WS-03)
- test lead with banana plug; 1,2m; yellow
- test lead with banana plug; 1,2m; blue
- test lead with banana plug; 1,2m; red
- test lead on a reel with banana plugs; 30m; red
- test lead on a reel with banana plugs; 15m; blue
- USB transmission cable
- pin probe with banana connector; yellow
- pin probe with banana connector; red
- pin probe with banana connector; blue
- test lead with banana plug; 1,8m; 5kV; red
- test shield lead with banana plug; 1,8m; 5kV; black
Optional accesories of the meter MPI-525:
www.sonel.pl
[e-mail]
Sonel S.A.
ul. Wokulskiego 11
58-100 Świdnica, PL
tel. [phone]
fax [phone]
!
2500V
Insulation
resistance
measurement
Possible measurements
Testing of general and selective RCD with the rated
differential current of 10,30,100,300,500 and 1000mA.
(Type AC, A and B).
Measurement of insulation resistance:
- with test voltage 250V, 500V, 1000V, 2500V,
Bi-directional testing of PE wire continuity using
200mA current.
- Autocalibration of test leads.
Phase sequence testing.
Memory is divided into 10 memory banks each of them containing
99 memory cells.
Battery charge indicator.
AUTO-OFF function.
USB interface.











Short-circuit loop measurement:
- impedance measurement with 23A current (44A phase-to-phase) -
short-circuit resistor R=10Ω,
- measurement range: 95...440V, frequency 45...65Hz,
Short -c ircui t l oo p m ea surem en t w it h r esolu ti on
0,01Ω, in distribution network without tiggering RCD
(I ≥30mA):
Δn
- automatic calculation of short-circuit, detection of phase voltage
and phase-to-phase voltage,
- additional UNI-Schuko plug for automatic measurement,
AGT adapter for 3 phase network measurement.
- measurement range up to 10GΩ,
- automatic discharging after measurement,
- automatic measurement of all resistences in 3,4,5-wire cables
using optional adapter AUTO-ISO,
- acoustic signals in 5sec intervals for insulation resistance
characteristic,
- safety measurement - protection against overvoltage.
Measurement of earthing resistance.
- pin probe 5kV with banana connector; red
- crocodile clip K04; 5kV; black
- crocodile clip K02; yellow
- crocodile clip K02; red
- earth contact test probe (rod); 0,3m
- carrying case L2
- hanging straps
- battery case LR14 (size C)
- batteries
- calibration certificate issued
by calibration laboratory
WASONREOGB2
WAKROBL20K04
WAKROYE20K02
WAKRORE20K02
WASONG30
WAFUTL2
WAPOZSZEKPL
WAPOJ1
- probe with UNI-SCHUKO (WS-04)
- earth contact test probe (rod); 0,8m
- software for creation of documentation from
electrical measurements “SONEL PE4"
- interface for radio transmission OR-1 - receiver
- test lead on a reel with banana plugs; 50m; yellow
- test lead on a reel with banana plugs; 25m; blue
WAADAWS04
WASONG80
WAPROSONPE4
WAADAUSBOR1
WAPRZ050YEBBSZ
WAPRZ025BUBBSZ
- triple phase socket adapter AGT-16P
- triple phase socket adapter AGT-32P
- triple phase socket adapter AGT-63P
- adapter AUTO-ISO-2500
- RCD breaker testing adapter TWR-1J -
universal pin
WAADAAGT16P
WAADAAGT32P
WAADAAGT63P
WAADAAISO25
WAADATWR1J