Datasheet

www.sonel.pl
[e-mail]
Sonel S.A.
ul. Wokulskiego 11
58-100 Świdnica
tel. [phone]
fax [phone]
MPI-505
Index: WMPLMPI505
MULTI-FUNCTION ELECTRICAL
INSTALLATIONS METER
!
!
!
!
!
!
!
!
!
Measurement of short-circuit loop parameters:
- in L-PE, L-N, L-L circuits as well as in L-PE (RCD) circuits - without tripping RCD breakers of current ≥ 30 mA.
- impedance measurement of short-circuit loops in power networks of nominal voltages: 115/200 V, 220/380 V, 230/400 V, 240/415
V and frequencies in the range of 45…65 Hz..
Testing of AC and A types residual current circuit breakers:
- testing of regular and selective residual current circuit breakers of nominal differential currents: 10 mA, 30 mA, 100 mA, 300 mA,
500 mA, 1000 mA,
- I trip current measurement,
A
- t trip time measurement for 0.5I , I , 2I , 5I ,
A Δn Δn Δn Δn
- measurement of earth continuity and touch voltage without tripping RCDs,
- functionality of automatic measurement of residual current circuit breaker parameters.
Measurement of insulation resistance at voltages: 100 V, 250 V, 500 V and 1000 V.
Low-voltage measurement of resistance, protective connections and equipotential bonding:
- measurement of continuity of protective connections with current ±200 mA,
- automatic calibration of test leads - capability of using any test leads,
- measurement of resistance with low current and acoustic signaling.
Quick verification of correctness of the PE wire connection with a touch probe.
Measurement of AC voltage.
Indication of phase sequence.
Memory of 990 measurements, data transfer to a PC over the USB interface.
MPI-505 is equipment to perform complete test and verify on electrical installations according to the most common safety
standards (IEC 61557, VDE 0100, BS7671).