Datasheet

www.sonel.pl
[e-mail]
MPI-502
Index: WMGBMPI502
MULTIFUNCTION
ELECTRICAL
INSTALLATIONS METER
!
!
!
!
!
!
!
!
!
Short circuit loop parameters measurements:
- measurements of short circuit loop impedance in networks with rated voltage: 220/380V, 230V/400V, 240/415V and frequency
45...65Hz,
- measurements of short circuit loop impedance with current 15mA without tripping the circuit breaker.
Testing the RCD breakers of AC, A types:
- testing of prompt, short-delay (general) and selective RCDs for the rated current values 10, 30, 100, 300, 500mA,
- I measurement
A
- R and U measurement without tripping the circuit breaker,
E B
- extended RCD test function AUTO, with measurement of Z with current 15mA - measurement of I and t during one RCD
L-PE A A
tripping.
Detection of the replacement L and N in the socket and automatic swap in the meter.
Low voltage resistance measurements of protective circuits and junctions:
- measurement of resistance with ±200 mA current
- calibration of test leads - possibility of using any length of test leads,
- low current resistance measurement with acoustic signalling
Rapid check for the correct connection of PE wire using touch electrode.
Measurement of mains voltage and frequency.
Power supply from LR6 batteries or NiMH accumulators (option).
Memory of 990 measurements.
The device meets the requirements of IEC 61557 standard.
Sonel S.A.
ul. Wokulskiego 11
58-100 Świdnica, PL
tel. [phone]
fax [phone]