SONANCE GARDEN SERIES IN-GROUND SUBWOOFER I N ST R U C T I O N M A N UA L
Introduction Subwoofer Installation Thank you for purchasing a Sonance Garden Series Subwoofer. When properly installed, this subwoofer will provide you with years of outdoor entertainment pleasure. To get the most out of your new subwoofer, please read this manual thoroughly before you begin installation. Sonance Garden Series systems allow for speakers to be daisy chained together.
Waterproof Wire Nuts Positive IMPORTANT: BE SURE NOT TO LET ANY STRAY ‘+’ & ‘–’ STRANDS TOUCH EACH OTHER. TOUCHING STRANDS CAN CAUSE A SHORT-CIRCUIT THAT COULD DAMAGE YOUR AMPLIFIER AND DEGRADE SOUND QUALITY. Negative - + 9. After all the speaker connections are completed, connect the wires to your amplifier. 10. Turn your amplifier on and test the system with your favorite music. If the speakers are operating properly, refill the wire trench and enjoy your new speakers.
Specifications Model: SGS SUB Woofer: 10” (254 mm) dual voice coil polypropylene cone with a Santoprene rubber surround Frequency Response: 35Hz – 100Hz ±3dB Enclosure Material: High Density Polyethylene (HDPE) non-corrosive sealed enclosure Overall Dimensions: (W x H) 15” W x 24.8” H (381mm x 630mm) Woofer Enclosure: (H x Diameter) 17.40” x 12.20” (442mm x 310mm) Shipping Weight: 40 lbs (19kg) Woofer Enclosure Height 17.4” (442mm) Overall Height 24.
LIMITED THREE (3) YEAR WARRANTY Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the period stated below. Sonance will at its option and expense during the warranty period, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.
