Reference Guide
R12SUB ENC Specifications
Width: 14 1/4” (362mm)
Height: 70 7/8” (1,800mm)
Depth: 3 7/16” (87mm)
Mounting Depth: 3 3/8” (86mm)
Mounting Width: 16 1/4” (410mm)
R10SUB ENC Specifications
Width: 14 1/4” (362mm)
Height: 47 1/4” (1,200mm)
Depth: 3 7/16” (87mm)
Mounting Depth: 3 3/8” (86mm)
Mounting Width: 16 1/4” (410mm)
47-¼” (1200mm)
14-¼” (362mm)
16-¼” (409.5mm)
70-7/8" (1800mm)
14-¼” (362mm)
16-¼” (409.5mm)
3-3/8” (85mm)
3-3/8” (85mm)
47-¼” (1200mm)
14-¼” (362mm)
16-¼” (409.5mm)
70-7/8" (1800mm)
14-¼” (362mm)
16-¼” (409.5mm)
3-3/8” (85mm)
3-3/8” (85mm)
Width
Mounting
Bracket Width
Depth
Height
47-¼” (1200mm)
14-¼” (362mm)
16-¼” (409.5mm)
70-7/8" (1800mm)
14-¼” (362mm)
16-¼” (409.5mm)
3-3/8” (85mm)
3-3/8” (85mm)
47-¼” (1200mm)
14-¼” (362mm)
16-¼” (409.5mm)
70-7/8" (1800mm)
14-¼” (362mm)
16-¼” (409.5mm)
3-3/8” (85mm)
3-3/8” (85mm)
Mounting
Bracket Width
Depth
Height
Width
Subwoofer Features
Aesthetics
• Mix and match with Reference in-wall or
in-ceiling speakers
• One-piece paintable grille to blend into
your walls
• Available in 10” or 12” models to suit any
sized room or available wall space
Performance
• 1.4lbs (.64kg) N38SH Neodymium Magnet
• Dual Spider Technology (DST) allows for
increased movement
• 4 1/2” (115mm) precision-aligned voice
coil with 1 1/2” (30mm) winding height
Installation
• Designed for installation during the
construction or renovation process
• Enclosure is positioned behind the wall to
deliver unprecedented performance with
minimal visual intrusion
• Custom-tuned amplifiers ensure optimum
sonic performance
DSP Amplifier Features
• Capable of driving two subwoofers
• Comes with DSP designed specifically for the R10SUB & R12SUB
• DSP 2-150 - 1U half rack space saving design
• DSP 2-750 - 2U rack space
In-Wall Subwoofer Enclosure Features
• Combination of .5” and 1” MDF
• Extruded aluminum bracing for minimal obstruction of
airflow inside
the enclosure
• Mass damping of front and back walls of enclosure
• Long strand fiberglass internal damping for standing
wave dissipation
• Dual positive and negative terminals for maximum
wire durability
• Floating enclosure design to minimize vibration transfer
to adjoining rooms
• Fits in standard 2 x 4 stud bay
• Blank pre-construction plate for easy installation