Data Sheet

ManualsBrandsSonance ManualsIn-Wall SpeakersSonance Reference In-Wall Subwoofer Enclosure (Each)

VP10SUB NC

VP10SUB NC ENCLOSURE

DSP 2-150 AMPLIFIER

NC = NEW CONSTRUCTION

VP12SUB NC

VP12SUB NC ENCLOSURE

DSP 2-750 AMPLIFIER

Product Family Overview

From the company that invented the category, comes the

BEST SOUNDING, best looking and most complete range of

in-wall and in-ceiling speakers ever. Visual Performance

Series

comes in various shapes and sizes to compliment down lights and

décor and a complete range that allows you to enjoy a consistent

aesthetic for any application in any room.

Features and Benefits

VP10SUB NC and VP12SUB NC In-Wall subwoofers combines

elegant, modern visual design with uncompromised bass

performance for home theaters and multi media solutions.

The VP Series Subwoofers feature an innovative low profile driver

with an ultra low distortion motor and 4” diameter voice coil. The

VP12SUB NC In-Wall subwoofer incorporates a 12” woofer, while

the VP10SUB NC utilizes a 10” woofer. Dual central mount spiders

are used in both models to maximize the movement of the laminated

carbon fiber honeycomb woofer cone.

VP Series Subwoofer enclosures are constructed from a combination

of 1/2” and 1” MDF for superior isolation of bass and extruded

aluminum bracing for minimal obstruction of airflow inside the

enclosure. Mass damping of front and back walls of each enclosure

and long strand fiberglass internal damping for standing wave

dissipation is also incorporated. In addition, a floating enclosure

design minimizes vibration transfer to adjoining rooms. Both

enclosures fit in a standard 2 x 4 stud bay and a blank pre-

construction plate is included for easy installation.

VP Series Subwoofer amplifiers include DSP presets specifically for

the VP10SUB NC and VP12SUB NC drivers and enclosures. Each

amplifier is capable of driving up to two woofers. The VP10SUB NC

with DSP 2-150 amplifier extends down to 30Hz and is capable of

producing 108dB of output at 1 meter. The VP12SUB NC with DSP

2-750 amplifier extends down to 25Hz and is capable of producing

114dB of output at 1 meter.

Keeping in mind the different installation stages needed by the

CEDIA professional, the Visual Performance Subwoofer systems are

sold separately in three pieces; a woofer driver with grille, an in-wall

enclosure, and the outboard amplifier or as a system that includes

two woofer drivers with grilles, two enclosures, and the amplifier.

VP10SUB NC

VP10SUB NC ENCLOSURE SONAMP DSP 2-150 AMP

VP12SUB NC VP12SUB NC ENCLOSURE SONAMP DSP 2-750 AMP

VISUAL PERFORMANCE

SERIES

Summary of content (5 pages)

PAGE 1
V I S UA L P E R F O R M A N C E S E R I E S ® VP10SUB NC VP10SUB NC ENCLOSURE DSP 2-150 AMPLIFIER VP12SUB NC VP12SUB NC ENCLOSURE DSP 2-750 AMPLIFIER NC = NEW CONSTRUCTION Product Family Overview From the company that invented the category, comes the BEST SOUNDING, best looking and most complete range of in-wall and in-ceiling speakers ever.
PAGE 2
Subwoofer Features Sonance In-Wall Subwoofer Enclosure Features • Low profile driver • 1.5” of peak to peak travel • Ultra low distortion motor • 4” diameter voice coil • Dual central mount spiders to maximize the linear movement of the cone • Laminated carbon fiber honeycomb cone • Die-cast basket • Visual Performance grille • Combination of .
PAGE 3
SPECIFICATIONS VP10SUB NC VP12SUB NC SKU 92872 92873 UOM Each Each 10” (254mm) laminated carbon fiber cone with a rubber surround 12” (305mm) laminated carbon fiber cone with a rubber surround 30Hz - 250Hz ±3dB 25Hz - 250Hz ±3dB 8 ohms nominal 8 ohms nominal Power Handling 5 watts minimum / 250 watts maximum 5 watts minimum / 500 watts maximum Requirement Requires VP10SUB NC acoustic enclosure, sold separately.
PAGE 4
SPECIFICATIONS DSP 2-150 SPECIFICATIONS DSP 2-750 SKU 93093 SKU 93095 UOM Each UOM Each Number of Channels Power Output (RMS): RMS per channel @ 8 ohms RMS per channel @ 4 ohms RMS per channel Bridged @ 8 ohms Frequency Response Total Harmonic Distortion (THD): (1kHz) @ 8 ohms (1kHz) @ 4 ohms 2 (1 stereo pair) Number of Channels 2 (1 stereo pair) 473 Watts Power Output (RMS): RMS per channel @ 8 ohms RMS per channel @ 4 ohms / 70V RMS per channel Bridged @ 8 ohms 5Hz – 50kHz Frequency Res
PAGE 5
VP New Construction Systems VP10SUB NC SYSTEM 120V 92897 (2 SUBWOOFERS, 2 ENCLOSURES & 1 SONAMP DSP 2-150 AMPLIFIER) (Each) VP12SUB NC SYSTEM 120V 92896 (2 SUBWOOFERS, 2 ENCLOSURES & 1 SONAMP DSP 2-750 AMPLIFIER) (Each) VP10SUB NC, VP10SUB NC ENCLOSURE, VP12SUB NC AND VP12SUB NC ENCLOSURE LIMITED LIFETIME WARRANTY Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workma