Specifications

Specifications
©2017 Sonance. All rights reserved.
Sonance and Visual Performance are registered trademarks of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice.
For the latest Sonance product specification information visit our website: www.sonance.com
SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA
[phone] • FAX: [phone] • Technical Support: [phone]
www.sonance.com
LIMITED LIFETIME WARRANTY
Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance
Dealer/Distributor, will be free from defective workmanship and materials for the life of the Product, except for the grille, which is warranted for
five (5) years. Sonance will, at its option and expense, either repair the defect or replace the Product with a new or remanufactured Product or a
reasonable equivalent. Please visit our website and owner’s e-Manual for complete warranty and exclusion information.
11.07.17
Model:
SKU:
Unit of Measure:
Tweeter:
Midrange:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Shipping Weight:
R1C
93351
Each
1” (25mm) Ceramic dome, Ferrofluid-
cooled in an acoustic back chamber
5 1/4” (133mm) Carbon fiber/Rohacell
laminated cone with a rubber surround
Two 5 1/4” (133mm) Carbon fiber/Rohacell
laminated cones with rubber surrounds
70Hz - 30kHz +/-3dB
8 ohms nominal; 6 ohms minimum
5 Watts minimum; 150 Watts maximum
90dB SPL (2.83V/1 meter)
15 lbs (7kg) each
R1C • R1CSUR
Height
R1CSUR
93352
Each
Two 1” (25mm) Ceramic dome, Ferrofluid-
cooled in an acoustic back chamber
Two 5 1/4” (133mm) Carbon fiber/Rohacell
laminated cone with a rubber surround
Two 5 1/4” (133mm) Carbon fiber/Rohacell
laminated cones with rubber surrounds
70Hz - 30kHz +/-3dB
8 ohms nominal; 6 ohms minimum
5 Watts minimum; 150 Watts maximum
90dB SPL (2.83V/1 meter)
15 lbs (7kg) each
Dimensions
R1C
Width: 13 25/32” (350mm)
Height: 13 25/32” (350mm)
Depth: 7 9/16” (192mm)
Cut-Out Width: 12 3/8” (314mm)
Cut-Out Height: 12 3/8” (314mm)
R1CSUR
Width: 13 25/32” (350mm)
Height: 13 25/32” (350mm)
Depth: 7 9/16” (192mm)
Cut-Out Width: 12 3/8” (314mm)
Cut-Out Height: 12 3/8” (314mm)
Recommended Products
R1C & R1CSUR Flex Bracket
SKU 92800
Depth
Width
*Includes back plate
compatible with third party
seismic retention hardware.