Installation Instructions

46900V001_Rev-D_EN

“clic”

Fig. 2

2. Remove the two connecting sleeves beside the

motor carriage and attach to the track on the left

and right.

Fig. 3

3. Attach a track to each of the connecting sleeves.

Fig. 4

4. Plug in the ceiling control unit to the track behind the

guide idler.

Lay the chain over the guide idler.

90°

Fig. 5

5. Rotate the chain 90° and insert it into the chain

holder of the ceiling control unit.

Rotate the chain back 90°.

Fig. 6

6. Plug the plug-in unit onto the opposite side of the

track.

90°

Fig. 7

NOTE

The chain must be parallel to the track to

prevent damage to the operator.

7. Rotate the chain 90° and insert it into the chain

holder of the plug-in unit.

Rotate the chain back 90°.

6. Installation