Installation Instructions

46900V001_Rev-D_EN

10. Connections and special functions of the motor

carriage

⇒ Force and position deleted.

⇒ Frame photocell deleted.

Reset

1. Press the green Reset button on the motor carriage

for 15 seconds until the green status LED goes out.

⇒ Reset is performed.

10.14 Setting the DIP switches on the

motor carriage

Special functions can be set with the DIP switches on the

motor carriage.

For compliance with EN 13241-1, before initial operation,

the door type must be selected and set on the motor

carriage with the DIP switch.

The factory setting of the DIP switches is OFF, which is

then applicable for sectional doors.

NOTE

Do not use a metal object to set the

DIP switches, because this may damage

the DIP switches or the circuit board.

Use a suitable tool to set the DIP switches,

such as a at, thin plastic object.

DIP switch on

motor carriage ON

OFF

• Automatic

closing

function

activated

• Automatic

closing function

deactivated

• Partial

opening

activated/

lighting

function

deactivated

• Partial opening

deactivated/

lighting

function

activated

3+4