Installation Instructions

38
46900V001_Rev-D_EN
9.5 Attaching information sign and
warning signs
Fig. 1.1 Attach sticker near the stationary control or control unit
Fig. 1.2 Attach sticker on door panel
1. Attach the warning signs and information sign at a
cleaned and degreased point:
• far from moving parts
• near the stationary control or control unit
• at eye level at a highly visible section of the gate leaf
2. Run obstacle detection, see chapter "13.1 Testing
obstacle detection".
⇒ Initial operation is complete.
9. Commissioning