Installation Instructions

31
46900V001_Rev-D_EN
7. Removing and fastening covers
7.1 Cover of the motor carriage
Observe in particular the following safety instructions for
this chapter.
WARNING
Danger due to optical radiation!
Looking into an LED at short range for
an extended period may cause optical
glare. This may temporarily reduce
vision. This may cause serious or fatal
accidents.
► Never look directly into an LED.
WARNING
Danger due to hot surfaces!
After frequent operation parts of the
motor carriage or the control unit may
become hot. If the cover is removed and
hot parts are touched, they may cause
burns.
► Allow the operator to cool down before
removing the cover.
Removing cover
Fig. 1
1. Press on the cover lock at the back of the motor
carriage and remove the cover.
Installing cover
“clic”
Fig. 1
1. Insert the cover from the front and lock it to the motor
carriage at the back.