User's Manual

Important safety information
CAUTION
Possible damage to property
Please observe and comply with the given information to
avoid the possible risk of property damage.
Signs on the product
The figure shows where signs are placed on the drive.
Observe and comply with the information on the signs and
inform other about them.
1) Warning information
2) Specification to the safety low voltage
3) Identification label
2
1
14
15
16
Ra
Pow
Status
Safety
Command
Reset
13
3
4
5
6
1
2
3
Explanation of the symbols used in this
manual
Tool symbols
These symbols in the manual show you when you should use
specific tools. Here are a few examples:
Phillips screwdriver
Drill with 1/4” diameter wood bit
1/2” open-end wrench
Socket wrench with 3/8” socket
Other symbols
Drilling depth
Only screw in screws loosely, do not tighten yet
Now tighten the screws
It clicks into place and/or a clicking sound can be
heard
“clic”
3/8"
1/2"
Ø 1/4"
5en