User's Manual

58 en
Placing the drive out of operation
No electrical voltage may be present, if the drive and acces-
sory parts are to be taken out of operation or deinstalled. Pull
out the power plug from the power outlet or switch off the the
on-site circuit breaker or disconnect the on-site fuse for the
circuit that supplies the drive with voltage. Subsequently test
to be sure the drive is disconnected from the power by
switching it on (the drive must not move). Only begin with the
deinstallation after this.
Waste disposal
Please dispose of all components that have been placed out
of operation properly according to your local regulations.
Battery disposal
WARNING
There is the possible risk of injury or death if you do not
observe and comply with the following information.
Therefore, observe and comply with all listed instruc-
tions before disposing of batteries.
Never throw batteries into fire. They can explode.
Never dispose of batteries with the household waste Leaking
batteries can damage the environment. Please dispose of
batteries properly according to your local regulations.
Pack the batteries individually for disposal. Batteries must
never come into contact with metal objects, they could ignite.
Placing out of operation and disposal