User's Manual

55en
Troubleshooting
 Disconnect the opener from the power (switch off the cir-
cuit breaker to the opener or disconnect the fuse on the
circuit supplying the opener with voltage) and check to be
sure no voltage is present.
 Remove both lamp lenses (1). Press each of the lugs (2) in
the direction of the lamp lens.
 Unscrew both light bulbs in a counterclockwise direction.
 Remove the covering (1). Slide the covering in the direc-
tion of the arrow.
 Tighten the screw (1) with a small Phillips screwdriver.
 Open the controller housing cover downwards (2) and
unhook the (3) fastening.
1
2
3
2
1
14
15
16
Radio
Powe r
Status
Safety
Command
Reset
Learn
13
3
4
5
6
1
 Replace the defective fuse (1) (fuse T 10 A, 250 V). Fuse
dimensions 1/4” x 1-1/4” (6.35 x 32 mm).
 Attach the controller housing covering (1) to the side facing
the C-rail and fold it up.
 Tighten the screw (2) with a small Phillips screwdriver.
 Slid on the covering (1) in the direction of the arrow.
 Screw in both light bulbs (2) in a clockwise direction.
2
1
14
15
16
Radio
Power
Status
Safety
Command
Reset
Learn
13
3
4
5
6
1
2
“clic”
1
14
15
16
13
1
222
T 10 A, 250 V
1