User's Manual

47en
Regular maintenance
Maintain and care for the drive regularly as described in the
following. This ensures safe operation and increases the
operating life of your drive.
WARNING
There is the possible risk of injury or death through electrical
voltage from improper cleaning with water.
Never spray the opener or the controller housing with water
from a hose or with a high-pressure cleaner. This can lead to
a short-circuit.
There is the possible risk of injury or death through an acci-
dentally switched on drive.
You must disconnect the drive from the power supply when
performing any work on the door. Pull out the power plug
from the power outlet or switch off the the on-site circuit
breaker or disconnect the on-site fuse for the circuit that sup-
plies the drive with voltage. Subsequently test to be sure the
drive is disconnected from the power by switching it on (the
drive must not move).
Never touch or grab the moving door or other moving parts.
You could be crushed or jammed by the mechanics or the
closing edges of the door.
CAUTION
There is a possible risk of damaging the drive surface
through the use of improper cleaning agents.
Never clean the drive with aggressive cleaning agents such
as acids or bases. Only use the specified cleaning agents
and methods.
Maintenance schedule
Maintenance work
Cleaning the chain and C-rail
WARNING
There is the possible risk of injury or death through an acci-
dentally switched on drive.
You must disconnect the drive from the power supply when
cleaning the drive. Pull out the power plug from the power
outlet or switch off the the on-site circuit breaker or discon-
nect the on-site fuse for the circuit that supplies the drive with
voltage. Subsequently test to be sure the drive is discon-
nected from the power by switching it on (the drive must not
move).
 Pull the power plug out of the power outlet.
Or for a direct connection to the power mains:
When What How
Once a
month
Test the emer-
gency release
function
See chapter Using for the
first time, “Checking the
emergency release”
Check the power
cut-off
See chapter Maintenance,
“Maintenance work”
Checking the
photoelectric bar-
rier function.
See chapter Maintenance,
"Maintenance work"
Once a year
Check the door
and all moving
parts
According to the manufac-
turer's instructions.
Check the
mounting bolts of
the drive
Check for tightness and
tighten if necessary
As needed
Clean the chain
and C-rail.
See chapter Maintenance,
“Maintenance work”
Clean the con-
troller housing
and the carriage
With a dry lint-free cloth
Maintenance and care