User's Manual

43en
Operating and display elements, connections
Overview of the operating and display-
elements as well as the connections
This overview serves to give you a quick orientation. It shows
the most important operating and display elements as well as
the connections on the drive. A cross-reference shows you
where to find a detailed description in each case.
Buttons (1) *
– Learn (e. g. learn in the hand-held remote control)
– Reset (e. g. reset value)
* Details see chapter “Using for the first time”
Indicator lights on the control housing (2)*
– Radio (learn in the hand-held remote control)
– Power (voltage supply)
– Status (open/close)
– Safety (photoelectric barrier interrupted)
– Command (signal reception e.g. from hand-held remote
control)
* Details see chapter “Operation”
DIP switches (3) *
DIP switches for set-up of special functions:
(1) Soft running (soft opening and closing)
(2) Backjump (relieve door mechanics)
(3) Defined opening and closing
(4) Partial opening
* Details see chapter “Settings”
Additional functions and connections (4) *
Terminal for connection of accessories:
(1+2) DC 24 Volt (connect accessories with 24 V)
(3+4) Command (connect control device)
(5+6) Photocell (connect photoelectric barrier)
(A) External antenna (connect additional antenna)
(B) TorMinal (connect programming device)
* Details see chapter “Additional functions and connections”
2
1
14
15
16
Radio
Power
Status
Safety
Command
Reset
Learn
13
3
4
5
6
2
1
3
4
5
6
2
1
14
15
16
Radio
Powe r
Status
Safety
Command
Reset
Lear
n
13
3
4
5
6
1234
ON
S
AB
2
1
14
15
16
Radio
Power
Status
Safety
Command
Radio
Power
Status
Safety
Command
Radio
Power
Status
Safety
Command
Reset
Learn
13
3
4
5
6
Radio
Power
Status
Safety
Command
Radio
Power
Status
Safety
Command
Radio
Power
Status
Safety
Command
Radio
Power
Status
Safety
Command
Radio
Power
Status
Safety
Command
Radio
Power
Status
Safety
Command
Reset
Reset
Reset
Reset
Learn
Learn
Learn
Learn
1
1
4
B
A
3
2