Data Sheet

The EOLIS 3D WIREFREE™ io is a wind sensor, detects the vibration of the awning caused by the wind.

It’s a wireless sensor (with batteries), the technology is based on a three dimensional acceleration sensor. This

sensor is exclusively dedicated to arms awnings (folding arm, semi cassette and cassette awning) and must be

paired to a unique motor io-homecontrol®.

• WIND FUNCTIONNING

The wind is declared present when counter of vibration pass over the threshold:

- 4 times the threshold is over passed means wind (the same counter for each threshold set)

At this moment, the awning goes up and the motor locks the remote control and sensor orders (no possibility to go

down), then the vibrations disappear, the orders are available:

The time to wait before new orders:

User mode Demo mode

Remote control order 30s 5s

Automatism order 30min 30s

• THRESHOLD LEVELS ( G – FORCE)

Levels

0 1 2 3 4 5 6 7 8 9

Corresponding acceleration

* 0,15 0,225 0,3 0,375 0,45 0,525 0,6 0,675 0,75

* = automatic setting

TECHNICAL DATA SHEET

SDEV

–

FICA

121 R1

–

EOLIS 3D WIREFREE™ io Designation

References

Range

9016355 ; 9016354 ; 9016353

Sensors

FUNCTIONS

PAGE 1
TECHNICAL DATA SHEET 03 – 10 – 10 Designation EOLIS 3D WIREFREE™ io References 9016355 ; 9016354 ; 9016353 Range Sensors SDEV – FICA 121 R1 FUNCTIONS The EOLIS 3D WIREFREE™ io is a wind sensor, detects the vibration of the awning caused by the wind. It’s a wireless sensor (with batteries), the technology is based on a three dimensional acceleration sensor.
PAGE 2
COMPATIBILITIES AT THE 05/08/10 Motors : - Sunea io Sunilus io TECHNICAL SPECIFICATIONS Box Material ABS (UV stabilised) / PP Colours White / Black / Bronzal Size (mm) 25 X 38 X 153 (e x I x H) Index protection IP 44 Type AAA Alkaline batteries Number 2 Voltage 1.5V Lifetime (at ambient temperature) about 4 years (1 actions per day) Frequency 868.95 MHz Protocol io-homecontrol® Radiated power +6 dBm Modulation Type FSK dev. +/-19.
PAGE 3
DESCRIPTION / DIMENSIONS DESCRIPTION 1) LID 2 2) Water evacuation holes 1 3) Waterproof joint 4) 2 batteries: AAA Alkaline 3 5) Potentiometer: - 0:Automatic setting - 1-9: predefined setting 6 7 6) Electronic circuit board (integrated radio antenna) 7) Programming Button 8 5 8) 2 LEDs - Orange LED - Green LED 4 9) Fixing support 10) ON/OFF magnet 10 9 DIMENSIONS H = 153mm l = 38mm e = 25mm Space between the oblongs A = 93,3 mm B = 120,5 mm R&D Name: Date: T.JAIN QUALITY Name: Date: G.