User manual

24
EN - SLIDYMOOVE 300 installation and operating guide - SOMFY
ENEN
4
Advanced parameter settings
4.2 Automatic closing
4 5 6 7
x3
• Keep button 2 on the remote control depressed
until the indicator light goes out and is then lit
constantly.
• When you release button
2, the indicator light
flashes; press button 1 on
the remote control 3 times
The indicator
light
remains lit.
Automatic
closing is
activated.
The automatic closing can only be activated if the photoelectric cells are connected and recognised by
the motor's control electronics.
1 2 3
>2s
• Press the button on the
control electronics for 2
seconds.
The indicator light
comes
on.
• Position the remote control on
the control electronics target.
• Keep button 1 of the remote
control depressed until the
indicator light
flashes.
A Activating automatic closing
A Automatic closure operation
Press button 1 on the remote control to open the gate.
The gate closes again a@er 30 seconds or 5 seconds if the photoelectric cells detect a passage.
The automatic closing can be interrupted by pressing button 1 on the remote control. To then close the
gate, press button 1 on the remote control again.