User manual

18
EN - SLIDYMOOVE 300 installation and operating guide - SOMFY
ENEN
2
Commissioning and standard use
If an obstacle is detected (abnormal force on the drive):
• When the gate is opening: the gate will stop.
• When the gate is closing: the gate will stop and reopen.
2.6 Fully opening and closing the gate
2.7 Obstacle detection
• Gate closed: press button 1 on the remote
control to open the gate to the full.
• Gate moving: press button 1 on the remote
control to stop the gate.
• Gate open: press button 1 on the remote control
to close the gate.
The remote controls supplied with the kit are
already memorised and programmed so that
button 1 on the remote controls activates full
opening of the gate.
Button 1
Keytis NS 2