User manual
8
EN - SLIDYMOOVE 300 installation and operating guide - SOMFY
EN
Screws etc. required for installation of the rack and pinion (not provided)
This information is provided for information purposes.
Screws etc.
required
Tools required Drilling diameter
IRON OR
ALUMINIUM GATE
Self-drilling hex-head
screw for metal of type
ST 6.3 x 30mm
+ washer
Socket wrench no.10
5 mm with a drill for steel
PVC GATE
PVC is tool fragile to fasten the rack and pinion directly.
PVC gates generally have an aluminium or metallic brace or a steel core
(see the line above).
If a PVC gate does not have a brace: fasten a metallic brace to the gate where the rack and pinion will be
fastened.
WOODEN GATE
Wood screws, diameter
6 x 40mm minimum +
washer
Socket wrench no.10
Make a starter hole with a wood drill, diameter
2.5mm or wood auger.
! Tools required for installation (not provided)
17
8
12
3,5
PZ2
T25
10