User's Manual
Table Of Contents
- Important Safety Instructions
- Overview
- The ERU assembly
- Do you have everything?
- Safety precautions
- Introduction
- Installing the ERU
- Installation overview
- Installation guidelines and requirements
- Estimating cable requirements
- Assembling the mounting bracket and pipe
- Installing the ERU on solid wood or lap siding
- Installing the ERU on brick or poured concrete
- Installing the ERU on a cinder-block or hollow wall
- Installing the ERU under the eaves
- Installing the ERU on a roof
- Attaching the ERU to the mounting assembly
- Routing and grounding the exterior cables
- Routing cable to the SOMAport
- Troubleshooting
25
Installing the ERU
Mounting options
The way in which you assemble the mounting bracket and mounting pipe
depends on the mounting option you choose. The following table shows sample
wall, rooftop, and under-the-eaves installations to illustrate how the parts must
be assembled for each mounting option. The procedure on page 27 describes
how to attach the mounting pipe to the mounting bracket for the various
mounting options.
Option Sample Installation
Wall
Continued
00461