User's Manual
Table Of Contents
- Important safety instructions
- Regulatory Notices
- Contents
- Introduction
- Installing the SOMAport
- An overview of the installation
- Unpacking the SOMAport
- Choosing the best location for the SOMAport
- Connecting a computer via Ethernet
- Connecting a computer via USB
- Connecting multiple computers to the SOMAport
- Connecting telephones to the SOMAport
- Connecting the power supply and powering on the SOMAport
- Testing your equipment
- Configuring network settings for Ethernet connections
- Activating full service
- SOMAport Lights
- Troubleshooting and Getting Help
- Index
35
Installing the SOMAport
To connect two telephones to the SOMAport (when you have one
telephone line)
1
Insert a duplex adapter into the right (line 1) jack.
2
Insert the cable of one of the telephones into one of the jacks on the adapter.
3
Insert the cable of the second telephone into the other jack on the adapter.
What’s next
You are now ready to plug in the SOMAport. See “Connecting the power supply
and powering on the SOMAport” on page 36.
00347
Line 2 Line 1