User's Manual
Table Of Contents
- Important safety instructions
- Regulatory Notices
- Contents
- Introduction
- Installing the SOMAport
- An overview of the installation
- Unpacking the SOMAport
- Choosing the best location for the SOMAport
- Connecting a computer via Ethernet
- Connecting a computer via USB
- Connecting multiple computers to the SOMAport
- Connecting telephones to the SOMAport
- Connecting the power supply and powering on the SOMAport
- Testing your equipment
- Configuring network settings for Ethernet connections
- Activating full service
- SOMAport Lights
- Troubleshooting and Getting Help
- Index
30
SOMAport Setup Guide
Connecting multiple computers to the SOMAport
You can provide Internet service to a number of computers by using a
networking technology such as 100BaseT (Ethernet networking), 802.11b
(wireless Ethernet networking), HomeRF (wireless networking), or HomePNA
(phoneline networking). Be sure to enable all devices to have Internet access
through the Ethernet port on the SOMAport.
The following procedure describes how to connect multiple computers via an
Ethernet hub or switch.
To connect multiple computers to the SOMAport
1
Insert one end of the straight-through Ethernet cable into the Ethernet port at
the back of the SOMAport.
2
Insert the other end of the cable into any empty Ethernet port on your hub or
switch.
00092
5x
4x
3x
2x
1x
Uplink