User's Manual
Table Of Contents
- Important safety instructions
- Regulatory Notices
- Contents
- Introduction
- Installing the SOMAport
- An overview of the installation
- Unpacking the SOMAport
- Choosing the best location for the SOMAport
- Connecting a computer via Ethernet
- Connecting a computer via USB
- Connecting multiple computers to the SOMAport
- Connecting telephones to the SOMAport
- Connecting the power supply and powering on the SOMAport
- Testing your equipment
- Configuring network settings for Ethernet connections
- Activating full service
- SOMAport Lights
- Troubleshooting and Getting Help
- Index
29
Installing the SOMAport
Installing the USB software
The new hardware wizard is different in each version of Windows. Follow the
on-screen instructions, making sure you select the values indicated in the
following table for your version of Windows.
What’s next
If telephone service is available in your area and you are connecting a telephone
to the SOMAport, go to “Connecting telephones to the SOMAport” on page 32.
If telephone service is not available in your area or you are not connecting a
telephone to the SOMAport, go to “Connecting the power supply and powering
on the SOMAport” on page 36.
Windows Version Selections
Windows 98
When prompted for the type of search, select Search for the
best driver for your device.
When prompted for a location, select CD-ROM drive.
Insert the Windows 98 Second Edition CD if prompted.
Windows 2000
When prompted for the type of search, select Search for a
suitable driver for your device.
When prompted for a location, select CD-ROM drives.
Windows ME
When prompted for the type of search, select Specify a
location.
When prompted for a location, select Removable Media.
Windows XP
When prompted for the type of search, select Install the
software automatically.
Windows XP finds the driver automatically.