User's Manual Part 2

106 Part ######A revision 00a-DRAFT March 29, 2006
Macro Base Station Installation Procedures (NPM-1000)
NOTE: It may take several hours for the GPS clock module to determine its position.
To check if step 4 was completed correctly, issue the following commands:
$PMD1* ↵
$PMD2* ↵
If the GPS clock module has determined its position, the following output appears:
$PMD1,K
$PMD2,K
If the GPS clock module has not yet determined its position, the following output
appears:
$PMD1,S
$PMD2,S