User's Manual Part 2

March 29, 2006 Part ######A revision 00a-DRAFT 95
Chapter 5: Antenna Installation Procedures
Figure 5.2 RFSS with TMA Antenna Configuration
Radio RackRF Rack
Antenna BTS Antenna BTS
CINs
Grounding Plate
TT-LNA TT-LNA
Feeds (hard line)
To MGB
7/16 DIN(F)
7/16 DIN(F)
7/16 DIN(M)
Main Diversity
Antennas use
7/16 DIN(M) connectors
(MMDS antennas may
use N-type connectors)
TT-LNAs use
7/16(M) connector
s
for all ports
Demarcation point of shelter
1/2-inch superflex
Jumper (4 feet)
Red is Main Run
Blue is Diversity Run
On additional runs (that is, the cabling for additional sectors),
label antenna cables with additional red or blue tape.
For example, the cabling for sector 2 would use two red
stripes for main and two blue stripes for diversity.