User's Manual Part 2

80 Part ######A revision 00a-DRAFT March 29, 2006
Macro Base Station Installation Procedures (NPM-1000)
Figure 4.16 RF Rack Connector Layout
 To connect the PDP power cables
1 Ensure that each PDP circuit breaker in the radio and RF rack is in the OFF (down) position.
2 Connect each PDP power cable in the radio rack. Table 4.6 shows the origin and termination point of
each cable.
00448
CB 01
Radio Rack PDPNPM Racks (Rear View)
CB 15
Power