User's Manual Part 1

38 Part ######A revision 00a-DRAFT March 29, 2006
Macro Base Station Installation Procedures (NPM-1000)
Equipment, Tools, and Supplies Checklists
Tools
The following tools are recommended for a typical base station installation:
NOTE: Ensure that your torque wrenches are correctly calibrated according to the
methods and schedule specified by the manufacturer. The calibration date should be
indicated on each wrench.
Safety Equipment
The following safety equipment is recommended for a typical base station installation.
 Allen key set  Platform stepladder (6-foot)
 Bolt cutter  Plumb bob
 Cable ties  Portable bandsaw kit
 Chalk line  Scissors
 Drill bits (metal and masonry)  Scratch awl
 Electrical tape  Shims (for leveling racks)
 Extension cord  Socket sets (Imperial and metric)
 Flat file  Strap (with buckle)
 Framing square  Tape measures (linen and metal)
 Hacksaw (with blades)  Thomas and Betts (T&B) crimper
 Hammer drill  Torpedo level
 Heat gun (with heat shrink roll)  Torque wrenches
 Label maker  Utility knife
 Marking pencil  Wrench sets (Imperial and metric)
 Oxide-inhibiting compound  Vacuum cleaner with high-efficiency particulate air
(HEPA) filter
 Ear plugs  Flashlight
 Electrical gloves  Portable eye-wash station
 ESD straps  Safety glasses
 First aid kit  Safety shoes