User's Manual Part 1

20 Part ######A revision 00a-DRAFT March 29, 2006
Macro Base Station Installation Procedures (NPM-1000)
Torque Values
Table 2.4 shows the recommended torque values for the different sizes of fasteners used in the racks.
Unless otherwise specified, torque tolerances are ±2 inch-pounds.
Fastener Size Recommended Torque Fastener Size Recommended Torque
#4 (0.112-inch) screw 6 inch-pounds SMA connector 5 inch-pounds
#6 (0.138-inch) screw 12 inch-pounds Type-N connector 12 inch-pounds
#8 (0.164-inch) screw 18 inch-pounds 7/16 DIN connector 17 foot-pounds
1/4-inch PDP
compression lug nuts
78 inch-pounds RFSS module thumb
screws (#6 screw)
12 inch-pounds
5/16-inch screw 50 inch-pounds Power cable screws 8 inch-pounds
Table 2.4 Torque Values of Threaded Fasteners