User's Manual Part 1

18 Part ######A revision 00a-DRAFT March 29, 2006

Macro Base Station Installation Procedures (NPM-1000)

Physical Requirements

Before you begin installing the base station, read the following physical requirements. Ensure that each

requirement is met before proceeding with the installation, and consult your methods of procedures

(MOPs) for information concerning transportation method, route, and precise installation locatio

Space

Table 2.1 and Figure 2.1 show the physical dimensions of the racks. These dimensions do not include

space for cabling, the insertion and removal of modules, or adequate airflow.

Figure 2.1

Rack Dimensions

WARNING: Failure to meet the following requirements may result in personal injury

and cause damage to or destruction of the base station and surrounding equipment.

2.11 m

1.2 m

0.6 m

Racks Width Height Depth

One rack 0.6 m (23 5/8 inches) 2.11 m (83 inches) 0.6 m (23 5/8 inches)

Two racks 1.2 m (47 1/4 inches) 2.11 m (83 inches) 0.6 m (23 5/8 inches)

Table 2.1

Rack Dimensions