User Manual

December 16, 2002 Part 003609A revision 01 81
Chapter 4: Installation Procedures
P OPULATING THE S HELVES
These procedures describe how to install the CompactPCI power supplies and
cards into the utility and radio shelves. Table 4.4 lists the actions described in this
section.
NOTE: Your NPM may arrive with the shelves already
populated. If this is the case, ensure that the cards are properly
secured in the chassis and proceed to the next section.
Depending on the configuration of your NPM, the exact number
and layout of the cards may vary. See your E1 package for the
specific layout and cabling.
Action Page
Insert CompactPCI Power Supplies 86
Test CompactPCI Power Supplies 87
Insert the Radio and Utility Shelf Cards 89
Cover Unused Card Slots 91
Table 4.4 Populating the Shelves Procedure Summary
WARNING: Failure to insert a card in the correct slot may result in
damage to or destruction of the card or shelf. Ensure that all the cards are in
the correct slots before powering on the shelves.